Titration Calculator
Calculate analyte concentration from titration volume and molarity data.
Calculation Parameters
Adjust the values below.
Calculated Result
Analyte Concentration
Expert Tip
Ensure units are correctly formatted (e.g. Kelvin for gas temperatures and liters for volumes) to get chemically accurate outputs.
How this Calculator Works
This calculator allows you to solve Titration problems dynamically. Adjust the input parameters using the sliders or selection menu below:
- Analyte Volume (mL) (Range: 1 to 500, Default: 25)
- Titrant Molarity (mol/L) (Range: 0.01 to 2.00, Default: 0.10)
- Titrant Volume Used (mL) (Range: 1 to 250, Default: 20)
- Stoichiometry (Analyte : Titrant) (Dropdown selection, Default: Default)
The results are computed instantly and updated in the results panel on the right.
Formula & Methodology
where Ratio is stoichiometry multiplier (Analyte:Titrant)
Where:
- Analyte Volume: Parameter value.
- Titrant Molarity: Parameter value.
- Titrant Volume Used: Parameter value.
- Stoichiometry: Parameter value.
Step-by-Step Calculation Example
To calculate Titration manually, follow these steps:
- Identify the input parameters. For example:
- Analyte Volume (mL) = 25
- Titrant Molarity (mol/L) = 0.10
- Titrant Volume Used (mL) = 20
- Stoichiometry (Analyte : Titrant) = Default
- Apply the formula:
M_analyte = (M_titrant * Vol_titrant * Ratio) / Vol_analyte
where Ratio is stoichiometry multiplier (Analyte:Titrant) - Verify the calculated value which is updated instantly in the results panel on the right.
Frequently Asked Questions
What is titration? ▼
Titration is a quantitative analytical laboratory technique used to determine the unknown concentration of an analyte.
What is the acid-base titration formula? ▼
M_analyte = (M_titrant × V_titrant × n_analyte) / (V_analyte × n_titrant).
What is the difference between equivalence point and endpoint? ▼
Equivalence point is the theoretical point of stoichiometric neutral reaction; endpoint is the observed color change of indicator.