Gravel Calculator
Calculate tons and cubic yards of gravel, crushed stone, or pea gravel for driveways and paths.
Input Parameters
Enter details for calculation.
Gravel Required
Expert Tip
1 cubic yard of crushed gravel weighs approximately 1.4 short tons (2,800 lbs).
Calculation Methodology & Details
Formula
Applies standard construction engineering calculation formulas.
Important Disclaimer
The calculations provided are for educational and structural planning purposes. Always consult a qualified general contractor or structural engineer for site-specific verification.
How to Calculate Step-by-Step
Follow these steps to complete the calculation:
Step 1
Measure gravel coverage area length and width in feet.
Step 2
Input recommended depth (2" for walkways, 4" for driveways, 6" for heavy bases).
Step 3
Calculate volume in cubic yards and multiply by 1.4 for total weight in tons.
Detailed Insights & Expert Guide
ℹ️ About this Calculation
Estimates total volume in cubic yards and weight in short tons for gravel driveways, French drains, patio bases, and walkway landscaping.
Variable Glossary
Project Area
Length, width, and depth of gravel bed in feet and inches.
Gravel Density
Average weight factor of 1.4 tons per cubic yard.