UniCalculators
EN DE
๐ŸงฌBiology ๐ŸงชChemistry ๐Ÿ“Construction ๐Ÿ”„Conversion ๐Ÿ’ตFinance ๐ŸฅHealth

PEX Tubing Calculator

Calculate flow rates, pipe sizing, friction loss, and demand units for pex tubing plumbing systems.

๐Ÿšฐ

Input Parameters

Enter details for calculation.

Recommended Spec

1.50 units
๐Ÿ’ก

Expert Tip

Standard residential drain slope is 1/4 inch per foot. Ensure proper venting to prevent trap siphoning.

Calculation Methodology & Details

๐Ÿ“

Formula

Pressure Drop ฮ”P = f ร— (L/D) ร— (ฯvยฒ/2)

Applies Hazen-Williams friction loss and Uniform Plumbing Code (UPC / IPC) fixture unit sizing.

๐Ÿ“ข

Important Disclaimer

The calculations provided are for educational and budgeting estimates. Always consult a licensed plumber or general contractor for local permit verification.

How to Calculate Step-by-Step

Follow these steps to complete the calculation:

1

Step 1

Count total plumbing fixtures or enter peak hot water demand.

2

Step 2

Specify pipe material (PEX, Copper, PVC) and run distance.

3

Step 3

View recommended pipe diameter, slope drop, or heater tank capacity.

Detailed Insights & Expert Guide

โ„น๏ธ About this Calculation

The PEX Tubing Calculator provides accurate sizing, pressure drop analysis, and remodeling cost benchmarks for residential plumbing systems and home construction projects.

Variable Glossary

Input

Drain Fixture Units

IPC load value assigned to plumbing fixtures.

Parameter

Friction Factor

Hydraulics roughness coefficient of pipe material.

FAQ

What size water supply line is standard for a house?
Main residential water service lines are typically 3/4 inch or 1 inch diameter.
What slope is required for 3-inch or 4-inch drain pipe?
Plumbing code requires 1/4 inch per foot slope for 2" pipes and 1/8 to 1/4 inch per foot for 3" and 4" pipes.
What is first-hour rating (FHR) for water heaters?
First-Hour Rating (FHR) measures how many gallons of hot water the heater can supply per hour starting with a full tank.