Tons to Cubic Yards Calculator
Convert weight in tons to volume in cubic yards for gravel, stone, sand, and asphalt.
Input Parameters
Enter details for calculation.
Volume
Expert Tip
Crushed gravel typically weighs 1.4 tons per cubic yard; sand weighs ~1.35 tons per cu yd.
Calculation Methodology & Details
Formula
Applies standard construction engineering calculation formulas.
Important Disclaimer
The calculations provided are for educational and structural planning purposes. Always consult a qualified general contractor or structural engineer for site-specific verification.
How to Calculate Step-by-Step
Follow these steps to complete the calculation:
Step 1
Input material weight in US tons.
Step 2
Select material type density (e.g. gravel 1.4, soil 1.1).
Step 3
Divide tons by density factor to find required volume in cubic yards.
Detailed Insights & Expert Guide
ℹ️ About this Calculation
Converts material weight in US short tons to volume in cubic yards based on bulk material density. Essential for ordering aggregate materials, soil, sand, and rip-rap for construction sites.
Variable Glossary
Material Weight
Total aggregate weight in short tons (2,000 lbs/ton).
Bulk Density
Specific weight density factor of material in tons per cubic yard.