Fuel Pump Size Calculator
Determine the required fuel pump flow rate (Liters Per Hour - LPH) based on engine horsepower and fuel type.
Input Parameters
Enter details for calculation.
Recommended Pump Flow
Expert Tip
Fuel systems should include at least a 20% flow safety margin to prevent high-load fuel starvation.
Calculation Methodology & Details
Formula
Calculates the fuel flow mass rate required to feed horsepower targets, converting to liquid volume LPH.
Important Disclaimer
The calculations provided are for educational and general informational purposes only. They do not replace professional advice or diagnostic validation. Always consult a qualified specialist.
How Fuel Pump Sizes are Selected
Follow these steps to complete the calculation:
Enter HP target
Enter projected peak engine power.
Select Fuel Type
E85 requires ~30-40% more volume than standard pump gas due to lower energy density.
Related Tools
Detailed Insights & Expert Guide
ℹ️ About this Calculation
This calculator assists in performing detailed math and engineering calculations for Fuel Pump. By providing precise inputs, you can instantly estimate target outputs for planning and everyday reference.
Variable Glossary
Input Value 1
The primary numerical value required for the mathematical model.
Input Value 2
The secondary parameter or coefficient used to scale the final output.
How to Calculate Step-by-Step
Step 1
Enter the required measurements or factors into the respective input fields.
Step 2
Double-check your units (e.g., metric vs imperial) to prevent calculation offsets.
Step 3
Observe the calculated output updated instantly in the results panel.